EVDO USB ModemUM100Cwww.utstar.com/handsets
3. USING QUICKLINK MOBILE Today’s online world offers more services everyday and Wireless gives you the tools you need to take advantage of the best
At a glance you can see the signal strength and battery level. Select “Refresh Networks” from the “Tools” menu to update the information in this
QuickLink Mobile will display status information at the bottom during the connection process as well as while connected. When not connected, the statu
Dormancy:The data session becomes dormant if you are not sending or receiving any data. As soon as you resume sending or receiving data, the data sess
• To forward an inbound message, select the message and press “Forward” button. The message will be populated in the send area below prefixed with
13124. QUICKLINK MOBILE PREFERENCES 4.1 General PreferencesOptions TabClick on “Options”, then “Preferences”.Minimize application into tray: When you
14This feature allows QuickLink Mobile to automatically check for software updates. If an update is available, you will be notified of its size and a
15Connect TabWhen you select the “Set Options” button from the screen above, the following options will appear (“Options”, “Preferences”, “WWAN tab”,
VPN TabThe following options exist on the VPN tab (“Options”, “Preferences”, “WWAN” tab, “Set Options. . . “, “VPN” tab) :VPN Client: QuickLink Mobile
174.3 SMS SettingsSMS (Short Text Message Service) is a messaging application for yourwireless device which allows you to compose and send text messag
CONTENTS1. BEFORE USING UM100C ...11.1 About this User’s Manual ...
184.4 Additional FeaturesIn addition to the basic features mentioned in previous sections, QuickLink Mobile has the additional features listed below.T
19The Session MenuConnect / Disconnect: You can connect or disconnect the wireless networks.Log: This provides a concise session log of your network a
The Tools MenuTest WWAN Device: Retrieve and display detailed information about your WWAN device (1xEV-DO/1xRTT/CDMA USB Modem) such as manufacturer,
2120The Options MenuControl Panels: From this menu you have access to your system’s “Modem”, “Network and Dial-Up Connections”, and “Internet” control
5. INSTALLING UM100C 5.1 Precautions 1) Do not insert the UM100C before installing the software on the computer. When you complete the so
23225.3 Installing Software 5.3.1 Warnings • Make sure to complete the unplugging/ejection process before removing the UM100C. If you remove the
5.3.3 Using the Device Power statue LED • Green: Power OK. • Red: Not enough power. If you see Red on the power status LED it is recommend
25241) Unplug or Eject Hardware with Windows 2000 • As shown in the above figure, two “NEC PCI to USB Open Host Controller” options will be display
2726 • Then, the above window will appear. It is now safe to unplug the UM100C.2) Unplug or Eject Hardware with Windows XP • As shown above, onl
2726 • Click the [Close] button. It is now safe to unplug the UM100C.3) Unplug or Eject Hardware with Windows Vista • As shown above, only one “
1. BEFORE USING UM100C 1.1 About this User’s Manual You will find all the information you need to install and use the UM100C inthis user’s manual. Be
2928 • Click the [Close] button. It is now safe to unplug the UM100C.5.3.5 Remove the UM100C from your laptop • Remove the UM100C from your lap
29283) The device is connected to and powered by the computer as soon as the USB Y cable is plugged properly into the appropriate Type A USB port(s).
6. REGULATORY AND SAFETY INFORMATION 6.1 Regulatory Notices UM100C complies with Parts 15, 22, and 24 of the FCC rules. It has beentested with the t
3130 • Consult the dealer or an experienced radio/TV technician for help.4) This USB device does not exceed the Class B limits for radio noise emi
4) Do not use this USB device while driving a car, since it can distract driver’s driving. In some area, using the communication device while driving
* In the United States and Canada, the SAR limit for mobile phones used by the public is 1.6 watts/kg (W/kg) averaged over one gram of tissue. The s
6.8 FCC Compliance InformationThis device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions:(1) This device m
(d) Damage resulting from connection to, or use of any accessory or other product not approved or authorized by the Company;(e) Defects in appearanc
ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED TO THE DURATION OF THI
21.4 Introduction to UM100C USB Modem The UM100C is designed for your PC’s USB port, which is available in most PC models. The UM100C can be used to
31.7 Configuration To use the UM100C, you should install the software included in the installation CDand configure the UM100C USB device. See the ne
2.1 QuickLink Mobile Setup ProgramSTEP 1: The “Welcome” screen appears. Click the “Next” button to continue with the installation process.STEP 2: Af
STEP 4: During this step the components of QuickLink Mobile product are being installed onto your computer. Installation will occur to the destinatio
2.2 QuickLink Mobile Setup WizardAfter you have successfully completed the installation process of QuickLink Mobile, you are ready to start QuickLink
STEP 3: The detection and configuration process for your wireless device is now complete. In this step you can elect to run QuickLink Mobile automati
Commentaires sur ces manuels